file Updates

  • IsraeliRD
  • IsraeliRD's Avatar Topic Author
  • Offline
  • Project Manager
  • Project Manager
  • Dragon Power Supreme
  • Posts: 3502
  • Thank you received: 913
15 Feb 2015 21:13 #1

Hey guys, long time no see.
The army has taken quite a toll with my time, and whatever spare time I do have does not go into Marble Blast, unfortunately. That is being slightly remedied in the next few weeks.

The MBG WRR #4 is coming extremely soon. The beginner levels are scheduled to the 21st of February, the intermediates on the 25th and advanced on the 28th. SDA update (aka release) is happening on the 28th as well.

MBP gets a few updates as well:
- Starting March 1st, anyone with high Multiplayer rating will need to start playing more to preserve their status. To encourage rated matches, any player with over 1850 Multiplayer rating points will need to play at least 6 rated matches every 2 weeks, or else they will start losing Multiplayer rating at the current rate of 1%/day. Rating loss will continue only to 1850 points, and nobody under that will be affected.

- Patches and updates.
We are planning to release a few game modes that HiGuy had been messing online with some players; I approved them all. These will be pushed out in incremental patches.
In addition to those, we are developing an in-game screen recorder which will join the demo recording system. The following are required from your computer in order to handle this:

- 1 CPU core (Dual Core CPU and above, mutli-threaded is good). One core is used for playing, and one is used for exporting.
- HDD or SSD with lots of free disk space. The recording cache uses RAW RGB output, meaning uncompressed frames. A recording of Learning to Roll can take 100MBs, and RIP your HDD for Space Station or Battlecube Finale. The final recording will be much smaller than the cache.

- [Windows only] A graphics card with OpenGL support. The game will now require you to use the OpenGL option in the options  menu. This is because the recorder makes use of specific OpenGL capabilities.

Note those are the same requirements for any screen recorder out there that uses uncompressed frames output as it takes lots of hard drive space really fast. This will enable players to record marble blast videos without the need for FRAPS, Camtasia, Bandicam, Screenflow and others.

Lastly TAS tools are being developed, and this will allow Tool-Assisted Speedrunning of any level frame-by-frame, so that the perfect speedruns can be produced.

Until next time,
Matan


"matan, now i get what you meant a few years back when you said that "the level in mbg is beyond me" after the last rampage i noticed things were insane, and now i truly feel that too" - Dushine, 2015.

Please Log in or Create an account to join the conversation.

  • Eguy
  • Eguy's Avatar
  • Offline
  • Expert Marbler
  • Expert Marbler
  • Booper Supreme
  • Posts: 614
  • Thank you received: 208
15 Feb 2015 21:30 #2
YESSSSSS
Two questions:
How do you determine if your computer has those requirements for the new recording system? Especially the CPU core.
I use Mac.
Can you record multiplayer matches with the new system?

"it's the internet eguy. where children are men. men are monkeys, and women are PQ."
-Jeff 2014

Please Log in or Create an account to join the conversation.

  • eNetro
  • eNetro's Avatar
  • Offline
  • Professional Marbler
  • Professional Marbler
  • Skilled PlatinumQuest Player
  • Posts: 374
  • Thank you received: 49
15 Feb 2015 21:41 #3
Great! While the team is at it, for the later updates, here are some bugs I've found:
A. When I select a marble under the 'Custom' category with the skin name, CustomMarble_01, for example, and enter a level, the marble will show 100% transparency level.
B. The Ring Level (multiplayer) is not properly working (gravity not automatically changes)
Thanks.

Awesome Hint:

Since the Awesome Time/Score is secret, you will have to beat it in order to find out what it is. Just practice every day, and be ready to keep pressing the 'Restart' button...A LOT!

Please Log in or Create an account to join the conversation.

  • Jeff
  • Jeff's Avatar
  • Offline
  • Elite Marbler
  • Elite Marbler
  • PlatinumQuest Programmer
  • Posts: 1680
  • Thank you received: 205
15 Feb 2015 22:02 - 15 Feb 2015 22:10 #4
Please note, that as an additional requirement, you will need to run the game in OpenGL.

Eguy wrote: YESSSSSS
Two questions:
How do you determine if your computer has those requirements for the new recording system? Especially the CPU core.
I use Mac.
Can you record multiplayer matches with the new system?


1. yes, MP matches can be recorded.
2. all Intel macs (except for the Intel Core Solo) run at least 2 cores or 1 core + hyperthreading. So, all mac users should be fine unless your using the first generation intel mac with core solo.

I am a programmer. Most here know me for being one of the major contributors to Marble Blast Platinum and PlatinumQuest.
Last edit: 15 Feb 2015 22:10 by Jeff.

Please Log in or Create an account to join the conversation.

  • Posts: 224
  • Thank you received: 156
16 Feb 2015 20:44 #5
TAS tools?

TAS TOOLS?!?

*proceeds to squeal like a little girl* :D

Please Log in or Create an account to join the conversation.

  • Frostfire
  • Frostfire's Avatar
  • Offline
  • Senior Marbler
  • Senior Marbler
  • Multiplayer Mastery
  • Posts: 915
  • Thank you received: 447
16 Feb 2015 20:50 #6
Woo!! Super excited for almost everything mentioned here ! :D Especially the gamemodes I came up with

Please Log in or Create an account to join the conversation.

  • Posts: 938
  • Thank you received: 431
16 Feb 2015 22:30 #7
What if I have an iMac G5 with a PowerPC processor? The latest version of Marble Blast Platinum I have been able to acquire is 1.50 Beta 3. Can I go beyond that and will you be adding support for PowerPC processors? Thanks.

Please Log in or Create an account to join the conversation.

  • Posts: 107
  • Thank you received: 20
18 Feb 2015 04:02 #8
Haha my rating is 1845. Missed it by 5!

Please Log in or Create an account to join the conversation.

  • Posts: 7
  • Thank you received: 0
18 Feb 2015 18:27 #9
Awesome stuff! I'm excited for new gamemodes and the screen recorder

Please Log in or Create an account to join the conversation.

  • Eguy
  • Eguy's Avatar
  • Offline
  • Expert Marbler
  • Expert Marbler
  • Booper Supreme
  • Posts: 614
  • Thank you received: 208
22 Feb 2015 22:40 #10
I had 1900-ish rating 2 days ago, and now I fell to 1847. lol. missed by 3.

"it's the internet eguy. where children are men. men are monkeys, and women are PQ."
-Jeff 2014

Please Log in or Create an account to join the conversation.

  • StewMan46
  • StewMan46's Avatar
  • Offline
  • Professional Marbler
  • Professional Marbler
  • i dont play anymore.
  • Posts: 370
  • Thank you received: 46
01 Mar 2015 12:04 #11
Rampage is now on the SDA website speeddemosarchive.com/MarbleBlastGold.html

Please Log in or Create an account to join the conversation.

Moderators: Doomblah
Time to create page: 1.284 seconds