lock The Tale of the Tall Skyscraper - Moving Platforms Activating Early

  • marblepalladium
  • marblepalladium's Avatar Topic Author
  • Offline
  • New Marbler
  • New Marbler
  • Posts: 6
  • Thank you received: 1
25 Jul 2017 17:33 #1
In the level The Tale of the Tall Skyscraper, some of the moving platforms which normally start moving when the marble rolls on them are activating before they should. One of them (the one where you have to avoid a bunch of bumpers) starts moving at the start of the level, while others move when the marble gets close but isn't actually on them. The level is impossible to beat because of this glitch.
The topic has been locked.
  • Posts: 193
  • Thank you received: 69
25 Jul 2017 21:03 #2
I haven't found out about this, but I imagine it must be quite annoying. With the platforms that start moving when the marble is close but not actually on them, under what circumstances does this occur? For instance, do you go to jump onto a platform but it starts moving before you land? If so, it may be that the platform trigger doesn't take height into account. If you get what I mean

SoundCloud page here:
The topic has been locked.
  • marblepalladium
  • marblepalladium's Avatar Topic Author
  • Offline
  • New Marbler
  • New Marbler
  • Posts: 6
  • Thank you received: 1
25 Jul 2017 21:38 #3
The moving platform triggers aren't too tall, they're too wide; they start moving while I'm rolling towards them.
The topic has been locked.
  • HiGuy
  • HiGuy's Avatar
  • Offline
  • Lead Developer
  • Lead Developer
  • PQ Developer Emeritus
  • Posts: 1334
  • Thank you received: 605
26 Jul 2017 04:28 #4
Yeah actually I'm seeing this too. Looks like a bunch of platforms have extra instant reset triggers that have a continue time that shouldn't be there. I'll bother Matan to look into it when he has the time.

This signature is real code
Code:
function clientcmd12dothepq() { commandToClient(LocalClientConnection, '34onthedancefloor'); }
The topic has been locked.
  • HiGuy
  • HiGuy's Avatar
  • Offline
  • Lead Developer
  • Lead Developer
  • PQ Developer Emeritus
  • Posts: 1334
  • Thank you received: 605
26 Aug 2017 23:37 #5
This has since been done for 2.1.0.

This signature is real code
Code:
function clientcmd12dothepq() { commandToClient(LocalClientConnection, '34onthedancefloor'); }
The topic has been locked.
Moderators: Doomblah
Time to create page: 1.439 seconds